Uniform Disc On-axis Illuminance

Calculate direct illuminance at the on-axis point facing a uniform-luminance Lambertian disc on a parallel plane.

Calculate direct illuminance at the on-axis point facing a finite circular luminous disc. Use uniform disc luminance, rather than substituting total lumens or peak candela.

Results update as you edit.

Calculating needs JavaScript. The form becomes available when its script is ready; the guide below is always readable.

Calculation inputs

Calculation inputs
Finite and zero or more across the full emitting disc.
Greater than zero; half the emitting diameter, not housing size.
Positive perpendicular separation between the parallel emitting and receiving planes.
A circular housing alone does not establish these optical conditions.

Continue your task

Use the result for the specified finite-source geometry. A real rectangular panel or an off-axis point needs a different model.

If this answers your question within the model’s limits, record the original inputs, unrounded result and conditions. Otherwise choose an action only when its condition applies:

See this task in the decision tree

Opening another tool does not transfer or store your entries. Keep the original values, units and conditions with the next calculation.

Use a finite source when its apparent size matters

A nearby luminous panel occupies a visible area rather than a single direction. This calculator integrates an ideal circular source with uniform luminance L, emitting according to the Lambertian model. The receiving point lies on the disc’s axis, on a plane parallel to the disc. Both the light path and the emitting area are unobstructed.

Use the radius of the emitting surface, not the outside housing. Its luminance is in cd/m², which differs from total lumens, incident lux and peak candela. A real circular fitting can have a nonuniform diffuser or a directional optical system; circular shape alone does not establish this model.

Integrate the apparent disc

At axial distance h from a disc of radius r, the apparent angular half-angle is α = atan(r/h). Illuminance integrates luminance with the receiving-plane cosine projection. With uniform luminance and the solid-angle element dΩ = sin θ dθ dφ:

E = ∫₀²π∫₀ᵅ L cos θ sin θ dθ dφ = πL sin²α.

Substituting the right-triangle relationship gives E = πLr²/(r² + h²), in lx. This is the elementary integration used by the tool, rather than a formula inferred from a product beam-angle rating.

Distance does not always follow the point-source shortcut

For an artificial uniform disc at 100 cd/m² with radius 1 m:

Axial separation Calculation Direct on-axis illuminance
1 m 100π/(1 + 1) 157.08 lx
2 m 100π/(1 + 4) 62.83 lx
3 m 100π/(1 + 9) 31.42 lx

Doubling the separation from 1 m to 2 m gives 40% of the original illuminance, rather than one quarter. At distances much greater than the radius, the denominator approaches h² and the expected inverse-square dependence emerges. In the close limit, E approaches πL within the ideal model; the tool requires a positive separation and does not evaluate physical contact.

Lux and angular half-angle display to two decimal places. Small positive values below display precision are marked as such, without being treated as zero in the calculation.

Interpret one point, not a whole receiving area

The result applies to the on-axis receiving point. Moving sideways changes the apparent shape, path lengths and cosine projections; this equation does not produce that off-axis distribution. Reflected light and other sources are additional contributions.

The point-source tool uses directional candela and ray distance for a different approximation. Choose it only where the actual source and distance support that approximation. Neither model establishes the uniformity, glare or compliance of a room.

Related tools

Diffuse Surface Luminance

Estimate luminance from surface illuminance and luminous reflectance for an ideal non-emitting Lambertian reflector.

Inputs and results
Inputs
Surface illuminance in lx and diffuse luminous reflectance as a fraction, with a Lambertian model declaration.
Results
Ideal reflected luminance in cd/m²; no glare or display-brightness assessment.

Uniform Cone Luminous Flux

Calculate solid angle and luminous flux inside an ideal circular cone with constant intensity throughout it.

Inputs and results
Inputs
Full circular cone angle in degrees and constant intensity in cd, with an explicit uniform-model declaration.
Results
Solid angle in sr and ideal cone flux in lm; not real total lumens from a peak-candela rating.

Point-source Illuminance

Estimate direct point illuminance from directional candela, add compatible sources, or scale a measured direct contribution by distance.

Inputs and results
Inputs
Directional intensity in cd, source-to-point distance in m and incidence angle from the normal in degrees.
Results
Direct illuminance in lx at the specified point, with model conditions.

Browse all lighting tools