Illuminance describes light arriving at a surface per unit area. Lux (lx) is lumen per square metre; a foot-candle (fc) uses a square foot instead. The larger numerical lux value does not mean a brighter measurement: it is the same illuminance expressed with a different area unit. Kilolux (klx) is simply 1,000 lux.
The NIST conversion table gives approximately 10.76391 lux per foot-candle. The exact international foot is 0.3048 metre, so a square foot is exactly 0.09290304 m². This gives:
- fc = lx × 0.09290304
- lx = fc ÷ 0.09290304
- klx = lx ÷ 1,000
The calculator retains the factor’s precision during calculation and rounds only the displayed result. Lux and foot-candles display to two decimal places; kilolux displays to four. A positive value below the smallest displayed increment appears with a less-than sign rather than as zero.
A converted reading keeps its original context
For an artificial example, 500 lx = 0.5000 klx = 46.45 fc after display rounding. Starting with 1 fc gives approximately 10.76 lx. Neither direction changes where the reading was taken, the meter’s accuracy or the lighting conditions.
Keep the measurement plane and operating conditions with the value when comparing readings. A reading on a floor and one on a kitchen bench remain different observations even after both are expressed in lux. A unit conversion cannot establish a suitable light level for either task.
Why lumens need a different calculation
Lumens describe luminous flux, while lux describes flux arriving per area. A total product lumen rating therefore cannot be converted to lux by changing a unit label. Geometry, distribution and the receiving surface matter. Where directional candela and point-source conditions are available, the point-source illuminance tool estimates direct light at a specified point; it does not turn a lumen label into a room-wide measurement.