Shared outline area is a geometric question
Two circular outlines can be separate, partly overlap, or have one contained within the other. This calculator treats the outlines as filled circles on one plane. It uses their diameters and centre-to-centre separation to find the shared area and the total area covered by either circle.
You can obtain compatible ideal diameters from beam spread geometry when the beam meets the plane perpendicularly. A tilted beam generally has a different intersection shape. A manufacturer’s beam-angle boundary also does not mean that illuminance is constant inside the circle or zero outside it.
How the circle relationship changes the calculation
Let r and R be the radii and d the centre separation. The MathWorld circle-intersection derivation gives the circular-segment calculation for the partial-overlap lens.
- If d ≥ r + R, the overlap area is zero; externally touching circles share no area.
- If d ≤ |R − r|, the smaller circle is contained within the larger, so overlap is the smaller circle’s area.
- Between those limits, two circular segments make the overlap lens. Their angles come from the cosine rule.
Union area = πr² + πR² − overlap area.
Subtracting the overlap once avoids counting the shared region twice. Overlap percentages use each circle’s own area as denominator, so unequal circles usually have different percentages.
Check two unit-radius circles
For an artificial example, use two 2 m diameters with centres 1 m apart. Each radius is 1 m. The overlap is:
2π/3 − √3/2 = 1.2283696986… m², displayed as 1.23 m².
Their union is 2π − 1.2283696986… = 5.0548156086… m², displayed as 5.05 m². About 39.10% of each circle is shared. Calculations retain the unrounded areas until the final display.
If the same circles are 2 m apart, overlap becomes zero. If a 2 m diameter circle is concentric with a 4 m diameter circle, the smaller is fully contained: it has 100% overlap, while the larger has 25% overlap. “100% of one circle” therefore need not mean the circles have the same diameter.
Overlap does not establish a lighting result
A shared outline says nothing about the directional intensity, incidence angles or light level at a particular point. For a compatible point-source model, direct illuminance requires the intensity towards that point, ray distance and incidence angle. Contributions and reflected light need their own treatment.
For a sketch with repeated positions, equal-cell grid geometry supplies coordinates. Neither that grid nor an overlap percentage sets acceptable spacing, glare or uniformity. Those conclusions require the actual distribution and project conditions.