Flash Guide Number Calculator

Use matching metric GN ratings to solve aperture, distance or required energy fraction, including compatible same-point flash contributions.

Use a supplied metric, full-power guide-number rating to estimate a direct manual-flash setting. Keep ISO, zoom, attachments, subject plane and rating conditions matched.

Results update as you edit.

Calculating needs JavaScript. The form becomes available when its script is ready; the guide below is always readable.

Calculation inputs

Calculation inputs
Multiple flashes add compatible exposure contributions at the same receiving point; guide numbers are never added directly.
Greater than zero from the actual manufacturer rating. Feet-based guide numbers must first be converted to metres.
Greater than zero; do not assume the published guide number is always at ISO 100.
Positive ISO sensitivity on a matching basis.
Greater than zero and no more than 1. Enter 0.25 for one-quarter energy, provided that fraction matches the flash’s output rating.
Positive distance from the flash, rather than from the camera. Keep the reference geometry and direct-flash assumptions applicable.
Greater than zero; enter 8 for f/8.
1–100 rows at the same subject point, plane and receiving orientation. Flashes must contribute within the same exposure; account for each rating and geometry separately.
Record the actual full-power rating, reference ISO, head zoom and the comparable direct-flash measurement basis.
No compensation is inferred for bounce, HSS, unknown modifiers or macro geometry.

Continue your task

Use the nominal aperture or distance only under the supplied rating. Multiple flashes add compatible exposure contributions, not guide numbers.

If this answers your question within the model’s limits, record the original inputs, unrounded result and conditions. Otherwise choose an action only when its condition applies:

See this task in the decision tree

Opening another tool does not transfer or store your entries. Keep the original values, units and conditions with the next calculation.

A guide number belongs to a stated flash rating

A metric guide number links a nominal direct-flash exposure to aperture and flash-to-subject distance: GN = f-number × distance in metres. A GN of 32 m at a particular ISO and output setting therefore corresponds to f/8 at 4 m within the rating’s conditions. The distance is from the flash to the subject; moving the camera alone does not change it.

The reference must identify the flash, reference ISO, full-power output, head zoom and any attachment. A concentrated zoom setting can produce a different on-axis guide number from a wide setting even though the flash’s stored energy has not changed. Scantips’ guide-number explanation discusses these direct-flash dependencies and the limits of applying the rating to bounce, modifiers, TTL and high-speed sync. Nikon’s flash manual also gives ISO, aperture and distance conditions for a specific camera; its numeric range is not a general rating for other flashes.

Why ISO and energy use square roots

At a fixed direct-flash geometry, exposure varies with flash energy and inverse-square distance. Since guide number is proportional to distance at a chosen aperture, it changes with the square root of both ISO sensitivity and energy fraction:

GN_effective = GN_reference × √(ISO/ISO_reference) × √(energy fraction).

The energy fraction is relative to the reference full-power rating. One-quarter energy uses 0.25, not 25. A control-panel percentage is suitable only if it represents the corresponding flash-energy fraction under the rating conditions.

Consider an artificial GN 32 m rating at ISO 100 and full energy:

Shooting conditions Effective GN Nominal aperture at 4 m
ISO 100, full energy 32 m f/8
ISO 100, one-quarter energy 16 m f/4
ISO 400, one-quarter energy 32 m f/8

Raising ISO from 100 to 400 multiplies GN by two. Reducing energy to one quarter multiplies it by one half. Those two changes cancel in the final row.

When the requested power exceeds the rating

The reverse calculation is energy fraction = (required f-number × distance ÷ full-power GN at the shooting ISO)². With the artificial GN 32 m at ISO 100, f/16 at 4 m needs a fraction of 4, or four times the rated full energy. That result is retained and labelled unattainable within the supplied rating; it is not clipped to 1 and presented as sufficient.

Arithmetic f-numbers are not automatically camera dial settings. A result of approximately f/5.656854 does not become exactly f/5.6. Ratings and measurements also carry their own precision, which this model does not improve by displaying more digits.

Several flashes contribute exposure, not a sum of guide numbers

For compatible direct flashes reaching the same subject point and receiver plane within one exposure, calculate each flash’s individual f-number Nᵢ = GNᵢ,effective/dᵢ. Add their exposure contributions as N_combined = √ΣNᵢ². Two contributions that each correspond to f/8 give √(64 + 64) ≈ f/11.313708, one stop more light than either alone. Adding the guide numbers directly would give the wrong exposure.

Each contribution still needs its own distance, reference ISO and energy fraction, with compatible rating and receiver conditions. Different directions or unknown modifiers cannot be made comparable merely by entering more rows. The model excludes TTL decisions, high-speed sync, bounce, unknown attachments, near-field macro geometry and significant ambient exposure. To distinguish separately metered flash and ambient contributions on a shared exposure-window basis, use the Lighting Ratio Calculator.

Related tools

Exposure and ND Calculator

Solve shutter time, aperture or ISO after an ND change, and convert cine frame rate and shutter angle to exposure time.

Inputs and results
Inputs
Baseline and target camera settings, absolute ND losses or transmission stacks; optional cine fps and angle.
Results
Equivalent settings, ND transmission/density, setting EV and distinctly labelled unfiltered-scene equivalent EV100.

Lighting Ratio Calculator

Calculate key/fill or bright/dark ratios and stop differences from compatible readings, with a separate flash/ambient share mode.

Inputs and results
Inputs
Two comparable linear readings or same-ISO/shutter metered f-numbers, measurement definition and conditions.
Results
Named light ratio, stop difference, optional declared equal-fill bright/dark model or flash exposure share.

Browse all lighting tools